|
1.
Place 3 tanks on stand
2. Top 2 tanks seal
and tighten the 1" 90 degree male barb in 1"
outlet.
3. Seal and tighten
the 1" stud barbs on the 2-90 degree elbows on
stand.
4. Place one end of
22" plastic tubing on middle tank and tighten with
clamp, place other end on stud barb on stand and
tighten with clamp.
5. Place one end of
44" plastic tubing on top tank and tighten with
clamp, place other end on stud barb on stand and
tighten with clamp.
6. Seal and tighten
dispensing valves on bottom tank and on the 2 - 90
degree elbows on stand. |
70 Gallon Triple Stacker
You
will need:
22" of 1" ID plastic tubing
44" of 1" ID plastic tubing
2-1" 90 degree male barb
2-1" stud barb
4 clamps for 1" tubing
3 dispensing valves and sealer
(rector seal #5 works well)
|
